Ritik chaudhary

 void setup() {  Serial.begin(9600);  delay(1000);  Serial.println("ESP32 Touch Test");  pinMode(onboard_led, OUTPUT); ) void loop() {  Serial.println(touchRead(TO)); // get value using TO if(touchRead(TO)<=20) { digitalWrite(onboard_led,HIGH); Serial.println("LED is activated as Touch is detected"); } else {  digitalWrite(onboard_led,LOW); } delay(1000);                     // check for touch value after every 1 second. }

 void setup() {  Serial.begin(9600);  pinMode(LED, OUTPUT);  } void loop() { digitalWrite(LED, HIGH); Serial.println("LED_STATUS--> ON"); delay(1000); digitalWrite(LED, LOW); Serial.println("LED_STATUS--> OFF"); delay(1000); }